SKI / Snowboard Sleeve Iron On Repair Patch

SKI / Snowboard Sleeve Repair Patch Instructions:

1. Clean and Dry : Wipe the damaged area and let it dry. 
2. Sew if Needed : For large tears, stitch first. 
3. Place Patch : Glossy adhesive side down, inside the sleeve.
4. Heat Press : Press with medium heat (140°C) for 20 sec.   (Tip: Use a thin cloth between iron and patch.)
5. Cool Down : Let it cool fully to bond.
6. Repeat if Needed - Reheat and press again if needed. 

Material : 100% Nylon with glue coating 

Size : 5cm X 9cm (Cut the suitable size for your use)